Filter By:
- Parts & Accessories (226)
- Wheels (245)
- Hubs (57)
- Rims (62)
- Spokes (11)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
Southwest Bicycles | Wheels Catalog sells a wide selection of wheels to improve your ride, from old to new, superlight to super strong, and we can custom build as well. From wheels to hubs, rims and spokes, we have what you need for your Road Bike, Mountain Bike, Child's Bike, and more!
$157.90
No words needed. Just google "EX 471 Leogang World Cup".
Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.
$33.00
Overkill? Maybe. Let’s just call it a rim you can ride over hill and dale without bothering to pack a spoke wrench.
Product specs:
- Sizes: 700c, 29-inch, 20-inch, 20x1 3/8-inch, 24-inch, 24x1-3/8-inch
- Hole counts: 32, 36
- Width: 22.5mm
$8.99
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention
$41.99 - $95.99
• Replacement freehub bodies for Bontrager Comp level hubs
• Compatibility: Race, Affinity Comp, and Rhythm Comp
• Log onto the techsite for additional freehub body and model year information
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$11.99 - $15.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm
$50.00
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$99.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with select Rhythm and Line wheels
$35.00
The Trace rear axle fits Race Face wheels equipped with Trace hubs, like the Aeffect Wheelset. Use it as a replacement axle or to convert your wheel to a different axle standard.
- Light and strong alloy construction
- Compatible with Race Face Trace hub
$5.99
Seal kit to keep water and dirt out of your Race Face Vault hubs.
$24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork. Kit includes Center Lock Adaptor, allowing riders to use 6-bolt rotors on Shimano Center Lock compatible hubs.
- 6mm spacer kit adapts 142 x 12mm rear hub to 148 x 12mm
- Includes 6mm adapter to 6-bolt rotors
- Includes external spline lock ring for thru-axle compatibility
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit 2 100w 26-inch rims
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit two (2) 70w 26-inch rims
$40.00
Ultra-light, bolt-on thru-axles, with a low-profile 6mm head for use on Whisky forks and others. They are also available in some common rear frame sizes. See manufacturer's specifications for fitment questions.
- Thread Length: 12mm
$25.00
- Colored rim decal kits to personalize your ride
- Decals to fit two (2) 50w 27.5+ rims
$149.99
The Box One Stealth Expert Front Hub is designed to be light FOR lightweight riders, and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. This makes the Stealth Expert Front Hub ideal for any Mini, Junior, or Expert wheel build, but may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Micro-Adjust Pre-Load Collar
- Lightweight Design
IMPORTANT NOTES
Warning: The BMX spec is optimized for even lower drag with unsealed bearing. They are designed to be ridden in dry conditions. If ridden in wet conditions you will need to service the internals after each event or riding session.
COMPATIBILITY
- Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork Black
- Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork
- Box One 24x1-1/8" 28-Hole Front Rim Black
- Box One 20X 1-1/8" 28-Hole Rim Rear Black
$8.95
Lightweight and easy to install, there are Ritchey rim strips for all wheel sizes and types.
- Easily snaps over your rims
- Stretchy, tightly woven material provides a close fit and protects from abrasion
- Sold as a pair
- Not for tubeless set up
$24.99
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.
$159.99
Upgrade or refresh your bike.
GENUINE REPLACEMENT PARTS
When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered.
PRODUCT DETAILS
- Original equipment replacement Bontrager Affinity TLR Disc 32H wheels
- Alloy double-wall rim with 21mm internal, 26mm external width
- Convert to tubeless with TLR rim strip and valve, sold separately
- Does not include skewer, reflector, rim strip, valve, or owner's manual
- Wheels shipped as photographed
$69.95
Star Rachet rings and springs kit for Star Rachet Ritchey hubs.
$69.95
Authentic replacement freehub for Ritchey Zeta WCS MY2024 (rim and disc brake version), Zeta Classic MY2024 (rim brake version only) & Zeta GX WCS wheels.
$22.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers.
- Sized and dimensioned specifically for BMX.
$819.99
A carbon road wheel with a 37mm depth that pairs our latest rim profile with Pro-level pricing to deliver an easy upgrade in speed, weight, and stability.
Fast and lightweight
The versatile Aeolus Pro 37 is the perfect wheel for climbs, crits, cross, and more. The strong, lightweight Pro-level OCLV Carbon allows for faster, more stable rim profiles—and the silky smooth hubs rolling on DT Swiss 350 internals deliver a quick-rolling ride wherever you roam.
All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy.
Product details
- OCLV Pro carbon offers an optimized blend of weight, strength, and durability
- All-new 37mm depth brings the benefits of aerodynamics to lightweight design
- Tubeless Ready (TLR) rims allow for quick transition to tubeless system
- 37mm depth OCLV Carbon rim (28mm outer, 21mm inner width), DT Aerolite spokes 24/24, DT Pro Lock nipples
- Center lock disc hubs with 12mm thru-axle front and rear, DT Swiss 350 hubs with 18 point engagement
- Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately
- Includes TLR rim strip, TLR valve, and traditional rim strip
- Warrantied for life, no rider weight limit
$244.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend
$31.00
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.
$7.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes
$322.00
WHY WE MAKE THIS
It’s our job to make the best riding hubs in the industry, and 100mm x 12mm front hubs are THE standard for road disc and gravel bikes, so we poured our hearts and souls, not to mention an awful lot of engineering, into this hub. We’re proud of it.
WHY YOU WANT IT
We already said it was the best, but everybody says that. Our R45 Centerlock™ hubs pair a lightweight hub body with our legendary, made-in-house bearings. The result rolls better, lasts longer, and looks way more handsome than anything else out there.
The stiffness of our one-piece axle translates to laser-precise bike handling. This hub also comes in one million (actually a handful) of cool colors.
Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use.
- Steel Bearings
- Engineered, manufactured, and assembled in Portland Oregon
- Legendary made-in-house bearings
- King Lifetime Warranty
- 100mm x 12mm thru axle
- Easily serviceable and completely re-buildable with our Universal or R45 Hub Service Tool
- Ceramic bearing upgrade available
- Available in 24, 28, and 32 hole drillings
- Available in Matte finish
HUB SPECIFICATIONS
Axle Width: 100mm
Flange Diameter DS & NDS: 57.4mm
Center to Flange DS: 30.6mm
Center to Flange NDS: 22.3mm
$22.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$8.99
- Fits all freewheel hubs
- Will not fit Cassette hubs
- Type: STD Plastic
- Color: Clear
Page 1 of 20
Next page