Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Southwest Bicycles | Wheels Catalog sells a wide selection of wheels to improve your ride, from old to new, superlight to super strong, and we can custom build as well. From wheels to hubs, rims and spokes, we have what you need for your Road Bike, Mountain Bike, Child's Bike, and more!

Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
GSport Ribcage Rim
$174.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
GSport Rollcage Rim
$79.99
If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/AM e-bikes up to 350 watts max
No Image
$550.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1910g per set - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/am e-bikes up to 350 watts max
All-City Deputy Front Hub
$105.00
Like to Freestyle? Try our Deputy hubs. The low-profile flanges are stronger and more impact-resistant than standard high-flange track hubs. - Tool Free adjustment, hub bearings are properly loaded when the wheel is installed - 6061 T6 aluminum hub shell - Low flange design for freestyle durability - 13 through 15 gauge spoke compatibility - Chamfered hub flanges reduce spoke stress - 6902 sealed bearings readily available - Weight: 247 g - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 58mm - Drive Side Flange Diameter: 58mm - Hub Spacing: 100mm
All-City New Sheriff SL Hubs
$99.99 - $109.99
New Sheriff hubs are the ultimate in track racing hubs. They minimize weight with larger cutouts in the flanges, lightened axles, shorter bolts, and slimmer end caps than previous versions. The result is a hubset that weighs a mere 432g, 198g for the front, and 234g for the rear. This makes it one of the lightest track hubsets in the world, a figure even more impressive when you consider that All-City didn't eliminate the usefulness of a fixed / fixed or fixed / free option as most racing hubs do. They feature the finest Japanese manufactured 6902 bearings which roll incredibly fast and smooth while retaining excellent seals for all weather, all-day everyday durability. Front hub specs: - Weight: 198g - Torque Spec: 33nm (25ft lbs.) - Non-Drive Side Center to Flange: 34mm - Drive Side Center to Flange: 34mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm Rear hub specs: - Weight: 234g - Torque Spec: 33nm (25ft.lbs.) - Non-Drive Side Center to Flange: 29mm - Drive Side Center to Flange: 29mm - Non-Drive Side Flange Diameter: 62mm - Drive Side Flange Diameter: 62mm
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Shimano M629 Centerlock Front Hub
$34.99
Shimano's M629 Front Hub offers durability and fast, smooth riding. This 32-hole hub features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze.
Stan's NoTubes Cyclocross Rim Strip
$29.99
Stan's Cyclocross Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Bontrager Rhythm Comp TLR 29 Front Wheel
$279.99
Bontrager's Rhythm Comp TLR 29 Wheels are a serious upgrade for most cross-country rides. The tough, tubeless-ready 6061-aluminum rims, sealed-bearing hubs, stainless-steel spokes and locking aluminum nipples mean these wheels ride great and last through more than their fair share of big epics. The 28mm-wide rims give your tires more contact with the ground with less squirm and better bite. Interchangeable axles give you the option of using this wheel with quick-release or 15mm thru-axle forks.
Quality Wheels Formula Convertible / WTB Asym i29 29-inch Rear
$190.00
Formula hubs on WTB Asym rims. - QR endcaps installed - Includes 142mm x 12mm endcaps - Includes QR skewer - Requires 34mm tubeless rim tape
Bontrager Aeolus Comp 5 TLR Disc Road Rear Wheel
$379.99
The feel of free speed What do you get when you combine state-of-the-art aerodynamics with the benefits of tubeless-ready? Say hello to Aeolus Comp 5 TLR Disc road wheel. This wheel features a classic aluminum rim and seamlessly attached 50mm carbon fairing for a proven aero profile that's been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR Disc is the high-value option for the aero-conscious rider looking to ride fast and stop on a dime. - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - No rider weight restrictions
Bontrager Aeolus Comp 5 TLR Disc Road Front Wheel
$319.99
The feel of free speed What do you get when you combine state-of-the-art aerodynamics with the benefits of tubeless-ready? Say hello to Aeolus Comp 5 TLR Disc road wheel. This wheel features a classic aluminum rim and seamlessly attached 50mm carbon fairing for a proven aero profile that's been wind tunnel tested to be incredibly fast. Aeolus Comp 5 TLR Disc is the high-value option for the aero-conscious rider looking to ride fast and stop on a dime. - Rim construction combines lightweight aluminum rim with a bonded carbon fiber fairing - Tubeless Ready (TLR) rims allow for quick transition to a tubeless system - No rider weight restrictions
Spank Spoon 135 Rear Hub 10x135mm Adaptor
$35.90
10x135mm adapter for SPOON 135 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy / Steel Weight (g): ±37 Compatibility: SPOON 12x135mm Rear Hubs
Spank Spoon 135 Rear Hub 12x142mm Adaptor
$39.90
12x142mm adapter for SPOON 135 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy / Steel Weight (g): ±37 Compatibility: SPOON 12x135mm Rear Hubs
Spank Spoon 135 Rear Hub QR Adaptor
$39.90
QR adapter for SPOON 135 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. - Material: Alloy - Weight (g): ±35 - Compatibility: SPOON 12x135mm Rear Hubs
Spank Spoon 20 Front Hub 15x100mm Adaptor
$18.00
15x100mm adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±22 Compatibility: SPOON front hubs
Spank Spoon 20 Front Hub QR Adaptor
$18.00
QR adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±26 Compatibility: SPOON front hubs
Bontrager Wheel Magnets 
$4.99 - $5.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed magnet provides a sleek, low-profile, aerodynamic solution
Bontrager TLR Rim Strips - 29-inch/700c
$9.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
Bontrager High Pressure Rim Strips
$4.99
Key features: - Replacement, high-quality rim strips that help prevent flat tires - Compatible with nearly all common wheels - To best know which model works best for you, measure the internal dimension of your rim - For rims with internal dimensions up to 15mm (ETRO 622x15mm), use the narrow rim strip - For rims with internal dimensions 17-19mm (ETRO 622x17-19mm), use the wide rim strip - Not Tubeless Ready
Bontrager Elite Skewers
$24.99
Bontrager's new Elite Skewers better integrate into your frame for better aerodynamics and aesthetics, while the premium internal cam design ensures these are here to last Key features: - New Elite Skewer integrates better into the frame for optimized aerodynamics - Internal cam design looks great, lasts longer, and offers quick, easy operation
Bontrager Hardtail Convert Skewers
$17.99 - $24.99
These skewers are a key part in adapting your Convert Mountain Bike to QR axles Key features: - Ergonomically engineered for maximum comfort while removing and replacing your wheel - Work with quick-release wheels and Convert dropouts
Spank Spike Race 33 Wheelset
$399.00 - $499.00
Freeride strength, race performance and weight. Although proven strong enough for top-level Freeride events like Red Bull Rampage, the SPIKE Race 33 wheelset is competition-tuned for World Cup level DH racers. Every SPIKE Race 33 wheelset is hand built and trued with SPANK’s new SPIKE Hubs, offering increased engagement, lighter weight, and improved adaptability. A 32H, 3-cross configuration ensures maximum stiffness and durability. With a 28mm inner width, and Bead Bite anti-burp rim hooks, the SPIKE Race 33 wheelset delivers unparalleled traction, stability and tubeless performance in a lightweight, durable package. - Key Technologies: Bead Bite, OohBah, Dynamal Alloy - Freehub: Steel Shimano (XD available) - Adaptors Included (mm): 15x100 included (12x135 sets only) - Adaptors Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 / 12x150 / 12x157 - Discipline: Race / Freeride
Spank Spoon 32 Wheelset
$429.00
A quality wheelset upgrade doesn’t have to break the bank! The SPOON 32 wheelset is the perfect bombproof, economic upgrade for your MTB. A hand built, 32H J-hook configuration with 3-cross spoke pattern gives the SPOON 32 wheelset a level of stiffness, durability, and spoke torque retention unmatched in its class. Now featuring SPANK’s SPIKE Hubs, the SPOON 32 Wheelset offers improved engagement, lighter weight, and enhanced adaptability. SPOON 32 rims are constructed of 6-series alloy, incorporating SPANK Industries’ patented Oohbah reverse-well rim design. - Key technologies: OohBah - Weight F/R (g): 135mm: ±2330 (26") / ±2430 (27.5"); 150mm: ±2370 (26") / ±2470 (27.5") - Freehub: Steel Shimano (XD available) - Adapters Included (mm): FRONT: 15x100 - Adapters Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 / 12x157 - Tubeless: Not recommended - Technologies: OohBah, Bead Nip, MGR - Discipline: race / freeride / trail
Spank Oozy Trail 295 Wheelset
$399.00
The SPANK OOZY Trail 295 Wheelset is a real game changer in the world of All Mountain wheelsets. Starting at just 1670g per set, the Trail 295 is considered by many to be the benchmark in lightweight alloy All Mountain wheels, yet its 29.5mm external/25mm internal width and burly OOZY straight pull hub system inspires confidence and begs to be ridden hard. Whether on the EWS Enduro Circuit, or just out smashing your local trails, the OOZY Trail 295 is up to the task. Don't let the OOZY Trail 295's classic refined looks fool you. Inside you'll find SPANK's newest trade mark rim technology. Bead Bite is a revolutionary tubeless enhancing bead hook system, with 6 rows of tiny interlocking teeth in each bead seat. Bead Bite rims and wheels trap the tire bead in place, providing increased tire sidewall integrity, and tire retention properties. Better yet, as the tire bead conforms into the Bead Bite ridges, multiple air seals are created, which improve tubeless performance and reduce burps, even at exceptionally low air pressures. When paired with SPANK's patented Oohbah inverted tube well rim profile, Bead Bite rims offer the highest strength-to-weight and tubeless security available today. SPANK OOZY Trail 295 Wheelsets come in 27.5" and 29" sizes, and are hand-built with exacting precision in a 3-cross, 28H configuration, using triple butted spokes and alloy nipples. Every OOZY Trail 295 rim is manufactured by hand in SPANK's in-house rim facility, Fratelli Industries, using Dynamal, a proprietary new era alloy developed specifically for highly weight-optimized rims. Used by James Doerfling, Jeremy Stowards, Darren Berrecloth and Rob J Heran, the Trail 295's have been tested by the best. Specs: - Hand Built and Trued - Tubeless Ready Rear Hubs: - Standard QR Rear Hub Adapter Kit Incl. - Japanese Bearing Upgrade - Super-Lite CNC Optimized Alloy Freehub Body - Oversized SSL (Single Spoke Length) Flange Design Front Hubs: - 20mm Front Hub Adapter Incl. - Japanese Bearing Upgrade - Oversized SSL Flange Design (adaptable to 20mm)
Bontrager Line Elite 30 TLR Boost 29
$274.99 - $324.99
Stay connected to the trail with 108 points of engagement and a 29mm internal width rim that supports aggressively treaded tires for maximum traction and cornering capability. With so much performance packed in, Line Elite 30 is a perfect upgrade to any bike. Key features: - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable rim with 29mm internal 33mm external width 28 hole fr/r - 28 front/rear nail head 14/15G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Bontrager Line Elite 30 TLR Boost 27.5
$274.99 - $324.99
Stay connected to the trail with 108 points of engagement and a 29mm internal width rim that supports aggressively treaded tires for maximum traction and cornering capability. With so much performance packed in, Line Elite 30 is a perfect upgrade to any bike. Key features: - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable rim with 29mm internal 33mm external width 28 hole fr/r - 28 front/rear nail head 14/15G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool
Page 1 of 37 Next page