Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
$147.60 - $169.99
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Bontrager's Race XXX Lite Seatpost is made of OCLV carbon for a sweet ride and minimal weight. Carbon's unique vibration damping properties smooth the road and the trail so you can go longer and harder. And, this post boasts an easy-to-use, one-bolt, infinitely-adjustable clamp.
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's Relief-Area Design (RAD) enhances strength where the frame clamps the post.
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
Easton's EC90 Seatpost is super light and amazingly strong. It's crafted from Easton's high-tech carbon for maximum stiffness and a premium ride. Plus, it even features carbon clamping pieces for the ultimate in lightness, while Easton's RAD and TaperWall technology distributes stress along the length of the post so it's insanely strong as well.
Ritchey's Classic Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Ritchey's "Classic" hi-polish silver finish - Two-bolt design for easy to adjust, vise-like grip - Low profile clamp reduces stress on lightweight rails and won't bottom out - Bolts oriented to the axis of the rails for greatest contact area with the saddle - 3D Forged 2014 - Available in 27.2, 30.9 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Hi-polish silver finish - 245g (27.2/350mm)
Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)
Choose from the many colors and add style to your ride with Origin-8's Compe-Lite Seat Post. It's crafted from light and durable 6000 aluminum, and features a single-bolt adjustable clamp for easy seat installation and fine-tuning.
$26.35 - $34.99
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
A sweet upgrade for your ride, Easton's EA70 Offset seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.
Easton's EC70 Zero Seatpost provides the low weight, strength and durability you're looking for. It utilizes vibration-damping carbon for a smooth, buzz-free ride, while Easton's Relief Area Design enhances strength without adding excess material. And, the EC70 features an easy-to-use, micro-adjustable two-bolt clamp to help you find your perfect position.
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
TruVativ's Stylo T30 Seatpost is constructed with a 1-piece 3D-forged 7050 aluminum tube to be light and strong. The sturdy dual-bolt head provides loads of adjustability so you can fine tune your saddle position.
Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
- RaceFace Ride XC Seatposts made of forged AL-6061 - Forged, anodized and shot peened AL-6061 mast - 2-bolt head holds saddle securely while retaining easy adjustability - Weight: 295 g
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - 150mm and 170mm travel options available in all diameters - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose) - LENGTH: 340mm, 390mm, 440mm, 480mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right - AVAILABLE IN: Travel: 100/125/150/170mm ; Diameter: 30.9/31.6/34.9mm
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right
- Aluminum dropper post with alloy trigger/clamp and cable junction cap - 100, 125 or 150mm drop options with the same air/oil system as the original LEV - Stationary remote cable routing, locates housing stop below the center collar - Housing stop rotates 360 degrees - 100mm drop, 335mm length post - 125mm drop, 385mm length post - 150mm drop, 435mm length post
Ritchey's beautiful Superlogic Carbon Seatpost is made of high modulus monocoque carbon for ultra low weight and impressive vibration damping without sacrificing strength. Ritchey's single bolt clamp uses precision forged aluminum hardware, which cuts weight even further! And, the single bolt clamp makes installation and adjustment a breeze, too.
- 3D forged one piece shaft and clamp base with robust cradle and top clamp - Length: 400mm - Turned CNC finish with a degree of texture for a positive clamp grip - Tough 6mm hardware, 0.5" clamp offset - 280g (27.2mm)
The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Bontrager's Speed Concept Seatpost lets you get your aero fit dialed. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics, and the clamp is compatible with both standard and oversize saddle rails. This seatpost is compatible with 2014 Trek Speed Concept 9 Series bikes.
- Lightweight UD carbon construction - 1 bolt clamp system with wide angle adjustments - Matte carbon finishing - Compatible for Shimano DI2 battery integration - Weight from 199g - Available in 27.2mm, 30.9mm, 31.6mm - Length: 400mm
TruVativ's carbon Noir T30 Seatpost is perfect for any XC rig. The Noir T30 Seatpost uses filament-wound tubes with a unidirectional carbon finish and all-new graphics. It’s light, it’s tough, and it can stand up to the abuses of XC riding and racing without looking worse for wear. Strategically positioned reinforcements add strength and keep the weight in check—just 235g and a dual bolt head design and titanium hardware keeps everything secure.
- Superlight CNC machined aluminum shaft for Mountain and Road use - Stainless bolts, aluminum upper rail clamps and cradle - Micro-adjustable head. 190g (27.2x400mm)
Page 1 of 5 Next page