Brakes/Levers/Pads

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

Keep your linear brakes safe working order with these Bontrager replacement brake pads. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

- Forged aluminum arms - 102mm arm length - 158g

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

TRP Alloy Rim brake pads are specifically designed for aluminum rim braking surfaces. - High performance brake pads - Aluminum rim compound - Fits all TRP road brakes, InPlace cartridges, Shimano and Shimano compatible road cartridges - Color: Black - Sold in sets of 4 (2 pairs)

Lock rings for all TRP Centerlock Rotors

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers

Full sintered metallic replacement pads for flat mount Hylex RS brakes. - Full metallic compound for maximum performance and power - Fits Hylex RS brakes - Color: TRP Copper - Sold per wheel

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right