Parts

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

Complete remotes and remote components for KS dropper posts.

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

- Standard steel replacement

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

- Sold in pairs - Allen wrench included

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Aluminum w/lock nut and mount - Slotted mount design

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

RockShox Rear Shock Parts

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- MTB or Road - 1.5 x 2667mm - Galvanized

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

KS Dropper Post Service Parts

Brass hose insert for Hope hydraulic disc brakes.

Replacement small parts for Hope disc brake Hope disc brake calipers.

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Saddle clamp heads and lowers for KS Dropper posts.

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Our mountain rim brake pads are available both with a threaded or smooth post.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

- Stock steel chainring bolts found on low/mid-range Race Face cranks - For double cranksets

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

- Chrome allen seat binder bolt

- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm

• Compatible with most side pull and center pull brakes • All weather compound

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

FSA Mega Exo Small Parts.

RockShox 35mm Seal Kit

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Shimano Dura-Ace R9100 Cassette Spacers

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock