Parts & Accessories
Power saving, round pedal stroke and a healthy foot arch make the SQlab insoles a must for every foot in a cycling shoe! Suitable for all cycling shoes, but also for normal shoes which are used for cycling, as well as for other uses. Developed in collaboration with ex-runner-up triathlon World Champion and foot expert Bjorn Gustaffson, SQlab has developed insoles that support the specific requirements found in cycling for the weaknesses of the respective foot type.
- Wind resistant fabric - Microfleece lining - Water resistant - Reflective logo
Dry feet equal happy feet For the wettest days when it seems the precipitation is never going to let up, the Waterproof Shoe Cover has you covered and will keep your feet warm and dry. Thanks to a thermal fleece lined fabric that traps body heat and taped seams with a waterproof YKK zipper, water stays out and warmth stays in. Product details - Fleece lined Stormshell fabric is waterproof while trapping warmth - YKK waterproof zipper and taped seams for ultimate protection and reliability - Designed for use with road or mountain shoes for maximum versatility Specifications - Temperature use (high): 75 deg. F - Temperature use (low): 55 deg. F - Waterproof Rating: 10,000mm - Fiber content: 45% Nylon / 35% Polyurethane / 20% Polyester - Material: Woven - Sole Construction: Closed with holes for clips
- SPD compatible - Single release - Hardware included
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. The Thermal Pro is Louis Garneau's warmest shoe cover that provides 360 degrees of customizable protection from the worst winter can bring. A seam-sealed 2 mm neoprene outer with a fleece-lined inner provides unparalleled warmth, a customizable under sole prevents anything from seeping up into your foot, and easy wide openings with waterproof zipper and covered zipper garage keep the fouls of winter weather at bay. - Under Sole: Durable pre-cut rubber sole for better water resistance - Side opening: Seam-sealed Hook and loop fastener with safety puller for easy slip on/off - Shoe Cover Visibility Features: HiViz 360 - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
- Wind resistant/water resistant - Insulation for warmth - Reflective logo - Available sizes S-XL
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
These versatile toe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for moisture protection. Features - Windproof softshell fabric with water-repellent coating - 3D-cut toe box matches the contours of cycling shoes - Specifically designed for road shoes - Toe area reinforced for durability Material Main fabric: 50% Polyester, 26% Polyamide, 9% Elastane, 8% Rubber, 7% Chloroprene Rubber (Polyurethane breathable windproofing & Water repellency)
Planet Bike's Comet Shoe Covers are made of neoprene for excellent water and wind resistance and warmth. Plus they have Velcro closures for easy on/off and reflective accents for safety.
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
- Keep your toes warm, cozy, and dry in the wind or rain with 100% neoprene - Slip them over the front of your cycling shoes and cleats for a stay-put layer of cozy thermal protection
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2014-Current shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
If the sun is shining, why not go for a ride despite the cold? The Wind Dry 2 is an excellent wind-breaker that will protect your feet from the cold so you can extend your riding season safely thanks to reflective accents on all sides. DETAILS: - Fabric: WIND DRY fabric blocks cold while providing breathability - Neoprene cuff: Better fit and prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - HiViz360: Reflectors at rear, front, and sides for optimum visibility
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
These off-road shoe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for rain protection. - Windproof softshell fabric with water-repellent coating - Optimal Panel Construction (OPC) with anatomic patterning for pedaling comfort - Highly-stretchable neoprene openings stretch for easy on/off - 3D toe box design matches the contours of MTB shoes - Reinforced material on toes - Waterproof zipper and taped seams - Off-road specific semi-closed sole for fit and functionality - Reflective elements for low-light visibility Material - Main fabric: 39% Polyester, 33% Polyamide , 12% Chloroprene Rubber , 9% Elastane, 7% Rubber (Polyurethane breathable windproofing & Water repellency)
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
Previous page Page 2 of 2