Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

$79.99
Sunlite's Fork Crown Race Setting Tool works on 1 and 1 1/8-inch steerer tubes. It sets the headset race perfectly on your fork without damaging it. Slip your race on the steerer, place the aluminum setting ring on top, slide the shaft over the steerer and give it a tap with a mallet. Viola! Your fork is ready to go.
$71.99
- Adjustable torque wrench with ergonomic design - Twist dial adjust torque in preset 4, 5, and 6Nm settings - Includes 3, 4, and 5mm hex bits and T25 Torx bit
$59.99
- 9-piece tool kit in a convenient roll-up tool wrap - Includes the tools needed to do most basic bicycle repairs Kit includes: - 1 x heavy-duty nylon tool wrap - 1 x patch kit with glue, scuffer, and tube patches - 1 x 6-inch adjustable wrench - 1 x 3-way Y-wrench with 8,9, and 10mm sockets - 1 x Folding multi tool with 2/2.5/3/4/5/6/8mm hex keys, PH2 and FL5 screw drivers - 1 x Multi-size spoke wrench - 1 x Chain tool - 2 x Nylon tire levers
$33.99
- Spring-loaded plier for single handed cog removal - Fits 1/2 x 3/32" cogs between 10 and 19 teeth - Non slip handle
$30.99
Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Attach it it you a half-inch ratchet or torque wench and go to work.
$29.99
• 14/15mm • 8mm Hex
$24.99
- Shimano style freewheel remover with guide - Comfortable handle with rubber grip - Compatible with all HG freewheels or cassette lockrings - Chromoly construction
$24.99
Use Sunlite's Shimano/ISIS BB Tool to remove Shimano and ISIS Drive splined 20-tooth bottom bracket cups. This tool uses wrench flats.
$22.99
- Slides into a hydraulic disc brake caliper to reset the piston when replacing pads, aligning pads, and performing other service procedures - Prevents scratching and damage to pistons
$22.99
Sunlite's Mini Chain Tool is small and light, so it fits in tight places and packs easily (that's a hint that you should carry it on every ride.) But don't let its small stature fool you: you get plenty of leverage thanks to wide handles.
$22.99
- True universal chain breaker works with up to 11-speed chains - Comfortable ergonomic grip - Includes one replacement pin
$21.99
- 14mm Socket wrench - 8mm Hex wrench - Hardened steel construction - Dual-compound grip
$21.99
- Easy-to-use cable stretcher with thumb lock for one-handed operation - Made from long-lasting and durable Chromoly steel - Ergonomic, easy-to-grip handle
$20.99
- 2-in-1 trailside disc brake repair tool - Features disc brake truing slots as well as a piston press/spreader in one convenient tool - Sandblasted chrome finish resists corrosion
$19.99
- 14mm socket for removing axle bolt - Rotating tip and non slip handle for ease of use - Chromoly construction
$19.99
The Sunlite Shimano Freewheel Remover w/Guide fits the lockring on Shimano cassettes. Its hardened steel construction will last longer than your cassettes.
$19.99
Sunlite's Sport Pedal Wrench is a double-ended wrench that fits any pedal size. The long handle gives you leverage, the rubber handle gives you a solid grip and the offset protects your knuckles.
$19.99
- 2 tools in one: Chain Whip/Pedal Wrench - Sprocket remover chain whip with built in lockring spanner - Rubber-coated non-slip handle
$19.99
- Compact tool for removing valve cores from Schrader valves, Presta valves, and valve extenders - Easily fits in any bag or jersey pocket
$18.99
- Chromoly construction - Used for truing most disc brake rotors - Non-slip handle - Multiple angles of use
$17.19
Sunlite's Adjustable Wrench is forged from steel and chrome plated for maximum durability. It's 6-inch length strikes the balance of maneuverability with good leverage. And the handle is coated for a non-slip, comfy grip.
$15.99
Be prepared out there with Sunlite's 9 Function Multi Tool. You've got 2, 2.5, 3, 4, 5 and 6mm Allen wrenches, a Torx 25 for your rotors as well as a flat and Phillips screwdriver. It's small, it's light and it barely takes up any room.
$15.99
- 15mm pedal wrench - Easy-to-grip rubber handle provides adequate leverage
$13.99
- Thin-profiled pedal wrench with a 15mm open end, and an integrated 16mm box end wrench - Thin profile is compatible with tricky pedals and those with narrow wrench flats - Rubberized coating on handle provides both positive grip and improved comfort - Made from long-lasting and durable Chromoly steel
$12.99
- Removes square, ISIS, and Octalink style cranks - Recessed threads won't damage crank threads
$11.99
- Chain gauge for checking wear and stretch - Also includes an integrated assembly hook for making installing chains easier
$11.99
- Fixed gear lockring wrench for removal of fixed gear cogs - Also works for BB and headset lockrings
$11.99
Sunlite's Series II Chain Tool works with Shimano IG, HG, and UG chains. The vinyl coated handles make chain maintenance a breeze, and the screw style makes loosening up a stiff link easy.
$11.39
- 9 function multi tool - Hex keys: 2/2.5/3/4/5/6/8mm - Flathead and Phillips screwdrivers
$9.99
Ask any shop wrench what their favorite, most-used tool is and they'll probably answer the 3-way hex. Sunlite's Hex Wrench has a 4, 5 and 6mm hex to fit the most popular sizes on your bike. The rubber handle lets you wrench all day in comfort, too.
Page 1 of 2 Next page