Parts & Accessories

Introduction - Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years. - Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag. Storage - We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top X-STRAP. - As you can see, you have two choices for storing your Air Strike CO2 cartridges and NANOFLATOR, or XLAB SPEED CHUCK on the rear of the CARBON WING, using the optional hexagonal X-NUT or in the XLAB MINI BAG. - Tires and tubes are always an issue, so now you can attach them neatly under the CARBON WING inside the XLAB MEZZO BAG. Hydration - With the CARBON WING you can use a single Aqua Shot bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA cage or the GORILLA XT cage for rear carriers. Adjustable Mounting - One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB Super Wing for customizing the installation. - In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions. Lightweight - We use the latest aerospace aluminum alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB Super Wing weighs only 85 grams. Bottom Line - The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros! Includes: - Carbon Sonic chassis - One Pair X-Straps - All hardware and instructions Material - Carbon Fiber proprietary unidirectional orientation. Weight - Chassis 49 grams, Hardware 30 grams. Total 79 grams Limited Lifetime Warranty - Because of our engineering and testing for this product we give it a Limited Lifetime Warranty to the original owner.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

Mount any water bottle cage using our Cage Strap Adapter to any diameter of 3.25" or less. This will allow you to mount a water bottle in all kinds of different areas on your bike—you choose what is best for you! The extra-wide length can be cut to your desired length. The Adapter won't move around because it has a rubber base and compresses on your frame when mounted.

- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

Increase your hydration capacity with Origin-8's HydroRail Double Seat Bracket. This bracket mounts to your saddle rails and holds two bottle cages. And, the angle is fully adjstable so you can customize it to keep your bottles within easy reach. Bottles and cages sold separately.

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

B-RAD Everywhere Base 2

The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

Keep your tube close and hydration on-tap with the Magnetic Tube Trap.

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Complete System! Fits a wide selection of direct-mount BTA aerobar systems. The perfect combination of simplicity and performance. Includes Over-the-Bottle Garmin® and Wahoo® compatible mount for an unobstructive view of your computer. Hybrid carbon fiber Raptor cage provides a full 6lb of bottle retention. Hyper-reflective COOL SHOT bottle to keep liquids super cool. Fits most standard shaped water bottles.

- Insulated koozie designed for 12 oz cans - Made for Origin8 by Bomber Jacket - Made of Premium 4mm neoprene - HD dye-sublimation print for long-lasting graphics - Reduces rate of warming by 50% - Collapsible design - Gold Alloy Zippers - Color: Speed

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

All metal cup made of 304 Stainless Steel.

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

A dynamic, integrated hydration solution created for hardcore runners, hikers and cyclist, the Fusion 3L Reservoir with Tru Zip Waterproof Zipper is ready for the long haul. Enjoy convenient compatibility thanks to a universal hanger that will fit any hydration-compatible packs. Our Quicklink System ensures easy on-the-go reservoir removal from the pack. Keep it clean with Hydroguard technology to limit bacteria in the reservoir and tube. Even better, the rigid backplate eliminates need for baffle for easier cleaning and drying. Repurpose Green Sustainability Badge: Made with safer chemicals.